Organization: Jorawar EngineersExpertise: Electrical Safety Audits | Thermography | Predictive MaintenanceReport Reference: JE/TA/2025/XXXClient: Confidential (Industrial Facility)Location: IndiaDate: June 2025 Case Overview An industrial facility engaged Jorawar Engineers to carry out a comprehensive Thermal Imaging Analysis of its Low Tension (LT) electrical distribution system. The primary objective of the study was to proactively identify abnormal heating conditions, enhance electrical safety, and reduce the risk of fire or unplanned system failures. The assessment was conducted on live electrical systems to ensure realistic operating conditions and accurate identification of potential electrical risks. Objective of the Study The objective of this thermal analysis was to perform live, non-invasive infrared thermography on the LT distribution system to: Methodology The thermal assessment was conducted using industry-accepted thermography practices: The inspection covered LT panels, cable terminations, and critical electrical interfaces under actual operating conditions. Key Observations During the inspection, a critical abnormality was identified at a cable termination point inside the LT distribution box. Observed Parameters: Initial Assessment:The elevated temperature indicated a potential loose connection or circuit overloading, posing a serious electrical and fire risk if left unaddressed. Thermal images and corresponding visual inspection photographs were captured to support the findings. Risks Identified The observed overheating condition presented multiple operational and safety risks, including: Root Cause Analysis Based on thermal patterns and site observations, the probable root causes were identified as: Recommendations Immediate Actions Corrective Maintenance Preventive Measures Fire Safety Controls Scope of Work Executed Reference Standards The assessment was conducted in alignment with internationally recognized standards, including: Benefits of Thermography Testing Application Areas Thermography testing is applicable across: Conclusion The thermal imaging study conducted by Jorawar Engineers successfully identified critical overheating within the LT distribution system. The insights obtained enable the client to take timely corrective and preventive actions, significantly enhancing electrical safety, operational reliability, and compliance with maintenance best practices. Survey Conducted By:Jorawar EngineersElectrical Testing | Fire Safety | Green Building | O&M 📞 +91 94141 35435 | +91 70168 03127📧 info@jorawarengineers.com | naresh.purohit@jorawarengineers.com🌐 www.jorawarengineers.com